adet Manufacturing Com-Pak Bath Heater 65101 CBC103TW
Click here for More information and specifications.
http://cadetheat.com/download/Com-Pak-specsheet.pdf
We are the Factory Authorized Master Parts Distributor for Cadet Manufacturing. Trust Reliable Parts for all of your Cadet Manufacturing heater, parts and accessories needs.
Features and Benefits:
– Ideal for instant warmth in bathrooms
– Thermal Safeguards
– High temperature manual reset:
– Turns off heater if normal operating temperatures are exceeded
– Durable steel tube and plate constructed heating element – painted to resist rusting
– Advanced built-in controls
– Thermostat: range 45����-85����F with disabled (no heat) position
– 60 minute timer overrides thermostat for instant warmth
– Powder coat paint process eliminates sharp metal edges
– Multi-Volt and Multi-Watt options
– Unique low profile grill only 1/2������� deep
Architectural Information:
Fan forced electric air heaters shall be UL listed, factory rated at 120V/240V or dual field rated from 208V to 240V. The painted wall mounting can is made from 20-gauge sheet metal with six electrical knockouts and a 22 cubic inch wiring compartment. Each heating unit shall be of unitized construction and attach to the wall can with a single screw and shall be self contained and completely separate from the wall mounting can. Elements shall be tube and plate, painted, with an over-sized 16 amp rating at 240V high temperature manual reset limit switch. A centrifugal blower shall be driven by an impedance protected motor. The motor shall be totally isolated from the heating element. Metal grill shall be of one piece, 20-gauge construction, and finished with a powder coat paint system.
Technical Information:
All heaters include a built-in single pole thermostat and 60-minute timer. The Com-Pak Bath Heater is not to be used with a wall thermostat. The multi-volt option must be configured for the correct voltage before installing the heater. The multi-watt option must be configured for the desired wattage before installing the heater. UL requires heater to be placed a minimum distance of 6������� from adjacent surfaces and 4.5������� from the floor. Manufacturer recommends installation 12������� from all surfaces. A 3�������� minimum clearance is required for furniture or other objects placed directly in front of heater.
NOTE: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum.
Rough In Dimensions: 8″W x 10.25″H x 4″D
Wall Can Dimensions: 7.875″W x 11.5″H x 4″D
Grill Dimensions: 10″W x 12.625″H x .5″D Replaces Part: EM551 Fits Model Numbers: